 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High Intensity AlInGaP LED Lamps Technical Data SunPower Series HLMP-WLxx HLMP-NL06 HLMP-WHxx HLMP-NH04 HLMP-WGxx HLMP-NG07 Features * T-1 (3 mm) and T-1 3/4 (5 mm) General Purpose LED Lamps * AlInGaP SunPower Intensity * High Light Output * Clear and Tinted Diffused Lens Options * Narrow and Wide Viewing Angles * Amber, Red-Orange, and Red * Available on Tape and Reel Description This family of 3 mm and 5 mm LED lamps is specially designed for applications requiring higher levels of intensity than is achieved with a standard lamp. The 5 mm lamp is available with 15, 30, and 65 degree viewing angle options. The 3 mm lamp is available with a 60 degree viewing angle. Applications * General Purpose * Consumer Goods * Indicator Lights Device Selection Guides T-1 3/4 (5 mm) Lamp Color Part Number Amber HLMP-WL12 Amber HLMP-WL27 Amber HLMP-WL02 Red Orange HLMP-WH12 Red Orange HLMP-WH27 Red Orange HLMP-WH02 Red HLMP-WG12 Red HLMP-WG27 Red HLMP-WG02 T-1 (3 mm) Lamp Color Part Number Amber HLMP-NL06 Red Orange HLMP-NH04 Red HLMP-NG07 Package Diff. Tint Luminous Intensity Min. mcd, If @ 20 mA 450 205 35 270 155 35 270 155 26 Luminous Intensity Min. mcd, If @ 20 mA 96.2 90.2 90.2 Viewing Angle 2 1/2 (Degrees) 15 30 65 15 30 65 15 30 65 Viewing Angle 2 1/2 (Degrees) 60 60 60 X X X X X X Package Diff. Tint 2 Technical Data Amber (d = 590 nm)[1] Minimum Luminous Part Intensity No. Iv (mcd)[3,4], HLMP@ 20 mA WL12 450 WL27 205 WL02 35 NL06 96.2 Red-Orange (d = 615 nm)[1] Minimum Luminous Part Intensity No. Iv (mcd)[3,4], HLMP@ 20 mA WH12 270 WH27 155 WH02 35 NH04 90.2 Red (d = 626 nm)[1] Minimum Luminous Part Intensity No. Iv (mcd)[3,4], HLMP@ 20 mA WG12 270 WG27 155 WG02 26 NG07 90.2 Typical Viewing Angle, 21/2 (Deg.)[2] 15 30 65 60 Epoxy clear clear tinted diffused[5] clear B/3 mm Package Drawing/ Nominal Diameter A/5 mm A/5 mm A/5 mm Notes: 1. Dominant Wavelength, d, is derived from the CIE Chromaticity Diagram, and represents the color of the lamp. 2. 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. 5. Tinting of amber lamps is yellow, red-orange lamps are tinted a reddish orange, and red lamps are tinted red. Package Dimensions A 3.80 0.30 5.00 0.20 (0.197 0.008) B 3.10 0.20 8.71 0.20 (0.343 0.008 1.14 0.20 (0.045 0.008) 3.35 0.30 5.70 0.5 2.00 2.35 (0.093) MAX. 31.60 (1.244) MIN. 0.70 (0.028) MAX. 0.8 MAX. (MENISCUS) 0.65 MAX. 23.0 MIN. CATHODE LEAD 5.80 0.20 (0.228 0.008) CATHODE FLAT 2.54 0.38 (0.100 0.015) 0.50 0.10 SQ. TYP. (0.020 0.004) 1.0 MIN. 0.44 0.2 1.00 MIN. (0.039) 3.60 2.54 0.3 0.4 + 0.1 -0 3 Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current Peak Pulsed Forward Current [3,4] Average Forward Current Reverse Voltage (I R = 100 A) LED Junction Temperature Operating Temperature Storage Temperature Dip/Drag Solder Temperature Wave Solder Temperature 5 mm 3 mm [1,3,4] 50 mA 30 mA[2,3,4] 70 mA 50 mA 30 mA 30 mA 5V 5V 130C 110C -40C to +100C -40C to +80C -40C to +120C -40C to +85C 260C for 5 seconds 245C for 3 seconds [1.59 mm (0.060 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 4. 2. Derate linearly as shown in Figure 5. 3. For long term performance with minimal light output degradation, drive currents between 10 and 30 mA are recommended. 4. Please contact your Agilent sales representative about operating currents below 10 mA. Electrical/Optical Characteristics at TA = 25C Parameter Forward Voltage Amber (d = 590 nm) Red-Orange (d = 615 nm) Red ( d = 626 nm) Reverse Voltage Peak Wavelength Amber Red-Orange Red Spectral Halfwidth Symbol Min. Typ. 2.02 1.94 1.90 20 592 621 635 17 Max. Units Test Conditions I F = 20 mA VF VR PEAK 1/2 5 2.4 V V I R = 100 A Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Distribution 1/2 Power point at I F = 20 mA Exponential Time Constant, e-t/s VF = 0, f = 1 MHz LED Junction-to-Cathode Lead Emitted Luminous Power/Emitted Radiant Power nm nm Speed of Response Capacitance Thermal Resistance Luminous Efficacy[5] Amber Red-Orange Red s C RJ-PIN 20 40 240 ns pF C/W v 500 235 155 lm/W Note: 1. The radiant intensity, Ie, in watts per steridian, may be found from the equation Ie = Iv /v, where I v is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 4 1.0 AMBER RELATIVE INTENSITY RED-ORANGE RED CURRENT - mA 70 60 AMBER 50 40 30 RED 20 10 0.5 0 550 600 WAVELENGTH - nm 650 700 0 1.0 1.5 2.0 2.5 3.0 VF - FORWARD VOLTAGE - V Figure 1. Relative Intensity vs. Peak Wavelength. Figure 2. Forward Current vs. Forward Voltage. 3.0 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 2.0 1.5 1.0 0.5 0 IF - FORWARD CURRENT - mA 50 40 RJA = 585 C/W 30 RJA = 780 C/W 20 10 0 0 20 40 60 0 20 40 60 80 100 IF - DC FORWARD CURRENT - mA TA - AMBIENT TEMPERATURE - C Figure 3. Relative Luminous Intensity vs. Forward Current. Figure 4. Maximum Forward Current vs. Ambient Temperature for 5 mm Lamps. Derating Based on T JMAX = 130C. IF - FORWARD CURRENT - mA 30 RJA = 500 C/W 20 RJA = 660 C/W 10 0 0 10 20 30 40 50 60 70 80 90 TA - AMBIENT TEMPERATURE - C Figure 5. Maximum Forward Current vs. Ambient Temperature for 3 mm Lamps. Derating Based on T JMAX = 110C. 5 1.0 0.9 RELATIVE INTENSITY - % 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 ANGULAR DISPLACEMENT - DEGREES Figure 6. Representative Spatial Radiation Pattern for 15 Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX12). 1.0 0.9 RELATIVE INTENSITY - % 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -25 -20 -15 -10 -5 0 5 10 15 20 25 ANGULAR DISPLACEMENT - DEGREES Figure 7. Representative Spatial Radiation Pattern for 30 Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX27). 1.0 NORMALIZED INTENSITY - % 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 ANGULAR DISPLACEMENT - DEGREES Figure 8. Representative Spatial Radiation Pattern for 65 Viewing Angle Tinted/Diffused T-1 3/4 (5 mm) Lamps (HLMP-WX02). 6 100 NORMALIZED INTENSITY - % 90 80 70 60 50 40 30 20 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT - DEGREES Figure 9. Representative Spatial Radiation Pattern for 60 Viewing Angle T-1 (3 mm) Lamps (HLMP-NL06/NH04/NG07). www.semiconductor.agilent.com Data subject to change. Copyright (c) 1999 Agilent Technologies, Inc. Obsoletes 5965-9780E (7/97) 5968-0947E (11/99) |
Price & Availability of HLMP-WG02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |